McAfee M-2750 - Network Security Platform Uživatelská příručka stáhnout pdf (Strana 26)

Cable the Auxiliary port

The Auxiliary port is used for modem access to the Sensor for setup and configuration.

You cannot use a modem the first time you configure a Sensor.

Task

For modem connections, plug a straight-through modem cable into the Auxiliary port on the

Sensor.

This port is labeled as Aux on the Sensor front panel.

Connect a modem to the Aux port.

Connect a telephone line to the modem.

Required settings for the Aux port are:

Name Setting

Baud rate 38400

Number of bits 8

Parity None

Stop bits 1

Flow Control None

Cable the fail-open port

Fail-open functionality for the GE Monitoring ports is accomplished using the standard Gigabit

Fail-open Bypass Kit, sold separately. McAfee recommends deploying active fail-open kits for

protection of mission critical networks. Both copper and optical versions are available. For more

information, see the documentation that accompanies the Kit.

Cable the Management port

The Management port is used for communication with the Manager server.

Task

Plug a Cat-5e Ethernet cable into the Management port.

This port is labeled as Mgmt on the front panel of the Sensor.

Connect the other end of the cable to the network device, such as a hub, a switch, or a router that

in turn connects to the Manager server.

To isolate and protect your management traffic, McAfee strongly recommends using a separate,

dedicated management subnet to interconnect the Sensors and the Manager.

Attaching cables to the Sensor

Cable the Auxiliary port

McAfee

Network Security Platform M-2750 Sensor Product Guide

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 37 38

Žádné komentáře

McAfee M-2750 - Network Security Platform Uživatelská příručka Strana 26